Of simple structure,
easy to operate, life cycle is long,
it is reliable that performance is steady,
the steam is small in dawdling amount,
suitable performance is strong, being
of high quality, products is it able
to bear high temperature , flammable
is it lay apt lotion dryness , form
of supplies that oxidize to adjust the
temperaturing to suitable for especially,
it proves it is a good dry equipment
that this machine is longed run by users.
Principle: Centre put into above shell
dry supplies, in positive and negative
mixing of tooth of a harrow that rotate
constantly, the axial of the supplies
walks up and down, the surface that
is exposed to with the shell inboard
wall brings in constant renewal in,
receive the indirect heating of the
steam, the even mixing of the tooth
of a harrow, crush excellent crushing
, make supplies surface moisture favorable
discharge, by dust remover , getting
wet dust remover , condenser of doing
etc. moisture of gasification, put from
the pump exit of the vacuum emptily.
Structure: Main part of the Vacuum harrow style drier |
 |
| 1,
Shell 2, Tooth of a harrow 3, Produce
the material device 4, Reinforced device
5, It is excellent to crush 6, Seal
installation 7, Mix the axle 8, Transmission
device |
Suitable
supplies
Mud form High pastel Supplies under
100 eyes Various kinds of pigment ,
mud head form supplies Strain and combine
The centrifugal separator strains and
combines soda ash detergent , alkali
stone starch , dyestuffs Pigment , clay
and dust ,etc. Clay ,etc. Cement ,etc.
Application under
the proper condition
100Supplies under the eye Solution Synthetic
fibers , crystallization Vacuum liquid
, emulsion Sweet potato stretch, ore
in sand form,etc. Suspension liquid
Type type and technology |
| main parament
Type type |
All gongVolume |
Area that conduct heat |
one
|
absent
Working pressure |
work
temperament |
mainBarrel
speed |
material |
Weight |
moorPower
|
External
dimension length×width×height |
| Axle
inset |
inset |
| XPG0.5 |
0.5 |
1.86 |
0.2 |
0.021 |
0.686 |
435 |
15-20 |
|
|
main：3 |
|
| no-main：5.5 |
| XPG1 |
1 |
6 |
0.75 |
0.021 |
0.686 |
435 |
9 |
A3 |
3400 |
5.5 |
3700×945×3270 |
| 1Cr18Ni9Ti |
3300 |
| XPG2 |
2 |
8 |
1.2 |
0.021 |
0.588 |
425 |
9 |
A3 |
4900 |
11 |
4570×1130×3455 |
| 1Cr18Ni9Ti |
4800 |
| XPG3 |
3 |
11.5 |
11.5 |
1.021 |
0.588 |
425 |
9 |
A3 |
6400 |
15 |
6076×1130×2980 |
| 1Cr18Ni9Ti |
6300 |
|
|
