| 一、The
work is by way of explanation |
| The top
and underpart of this machine have drums
which inserts set and awl body respectively,
inside differences are equipped with the
cylindrical and round cone-shaped filtration
component and filter screen . The supplies
filtering needing first pressurize to filter
to the supplies through the pressure of
the pump or the compression gas with the
pump pressing machine, filtrate and discharge
from filtrating the export , the solid in
the material thick liquid is being accumulated
in the storing in machine constantly, through
the scraper at this moment, push the rotation
of such parts as the spiral , agitator ,etc.,
not only can shave down the cake of straining
on the filter screen , Make the supplies
filter under the circumstances that the
thin layer strain the cake condition , keep
the high speed of filtration, and is promoting
straining the cake upwards. Straining cake
at reaching certain stock , can make thick
liquid material filter warm content very
much low straining cakes in machine, is
it push away direction of rotating , material
of spiral to change finally , strain cake
from bottom outside the person who put out
machine. If need to keep warm in the course
of filtering, lead to the hot matchmaker
when can insert one outside equipment ,
keep warm.
If the supplies need to wash , in order
to wash and use the liquid sparingly , strain
the material thick liquid in the machine
dry first , in the person who join , utilize
scraper , agitator and pinch spiral ,etc.
rotatory mixing of part cleaning solution,
is it strain cake thick liquid to make,
at this moment again through is it compress
gas or smoke method of vacuum filter and
strain cakes the thick liquid material and
then to add. So repeated thick liquid filter
again many times, until from supplies to
necessary demand, finally strain cake all
outside the person who put out.
|
二、Operational
procedure |
 |
1, a mouth open feed, and the closure of all other mouth. Open feed pumps to machine, enriched, opened filtrate export j1, j2, j3 start filtering (filtrate may have started moving in a short time filtering phenomenon that may be moving the filtrate return Liaocao). Filtrate clear slowdown to be opened after the plane, the direction for the operation of equipment arrow in the direction. To be a general plane, feed, filtration equipment to Lu:bing volume is about 50% of the total volume (volume Lu:bing loading solid materials should also, the proportion of the size of the adjustment), a closed mouth feed. For food warming filter, the filter should be opened before the hot-borne and m1 and m2, k1, k2 (m1 and m2 for the hot-borne imports, k1, k2 for hot-borne exports), so that the hot-borne aircraft within circle. |
2, opening into the mouth C to gas equipment and compressed gases, and continue to filter (pressure not exceeding 0.1Mpa), found gauge pressure markedly, closed filtrate export K1 continue to filter, such as gauge pressure continued marked decline, and then closed filtrate export j2 until filtrate export j3 no fluid out only. |
3, the closure of the mouth into the gas C and the import and export of all hot-borne aircraft and slowdown, open mouth F and standby Lu:bing export 1, the opening of the slowdown (in the opposite direction arrow operation), such as Lu:bing straight to the slowdown in the first arrow in the direction of the basic functioning to Lu:bing platoon net, and then to slow down the opposite direction to the functioning of all the platoon Lu:bing net. |
4, such as the need to wash after filtering, in the above steps 1, 2 completed, the closure of C into the gas mouth, open mouth into liquid B (also from the feed-a liquid to wash), to increase the amount of washing liquid, closed filtrate export j1, j2, j3, the continued operation of the slowdown, the full sound mixing to materials. Stir after repeating the operation steps 2, 3 can. For repeated washing, duplication operation steps 2, 3 and 4 could be. |
5, washing filter after opening a standby - F and Liu Hau 1. Restart slowdown plane, the direction of the operation referred to the arrow direction, the basic method of materials emit could slow down the functioning of the opposite direction, or directly around the slowdown, the net emission of all materials. Closed slowdown machine, the closure of the mouth of one material (the attention of Liu valves closed, sealed surface should first check whether clean-foreign matter, whether fully Mifengjuan good). |
|